Kawasaki VN2000 Passenger Floorboards/ Passenger Longboards Installation And...
download 1. Fasten floorboard assembly to mounting bracket using supplied 3/8″ x 3/4″ bolt, flat washer and lockwasher. Do not tighten at this time (Baron recommends the use of blue Loctite on this...
View ArticleGL1800 Goldwing Trike Conversion Kit Installation Instructions
download Disassembly of motorcycle: 1. Place the motorcycle on the center stand or lift. 2. Set the shock preload to zero. 3. Remove the four m8 x 1.25 SHCS from the passenger handles and remove seat....
View ArticleRUNE PASSENGER FLOORBOARDS INSTALLATION INSTRUCTIONS
download 1. Remove the seat. Remove the Phillips screws securing the two small black covers on either side of the battery and remove the covers. Next remove the two Phillips screws securing the chrome...
View ArticleHonda VTX 1800 And 1300 LINK ARM INSTALLATION INSTRUCTIONS
download 1. If you are installing the link arms at the same time as the passenger floorboards first install the floorboards per their instructions. 2. Fold the boards up in the retracted position....
View ArticleHONDA GL18005 Passenger Floor Board Risers Installation Instructions
download Flip the passenger floorboards in the up or closed position. Remove the four (4) allen bolts that attach them to the frame. Install the carriage bolts (round heads) into the backside of the...
View ArticleSUZUKI M109 PASSENGER FLOORBOARDS RELOCATION ARMS
download 1. If you are installing the relocation arms at the same time as the floorboards follow their instructions first and then refer to this sheet. 2. Fold the floorboards up, remove the allen...
View ArticleYAMAHA ROAD STAR PASSENGER FLOORBOARD RELOCATION ARMS INSTALLATION INSTRUCTONS
download 1. If you are installing Relocation Arms and Passenger Floorboards, install the floorboards first per their instructions. When installing the Relocation Arms with Passenger Floorboards already...
View ArticleTRIUMPH AMERICA AND SPEEDMASTER PASSENGER FLOORBOARDS INSTALLATION INSTRUCTIONS
download 1. Remove the 12mm nuts located behind the stock foot peg assemblies and remove the peg sets. 2. Starting on the left side locate the left floorboard assembly and left round chrome spacer...
View Article